DDave Econo & Micro-Mod for DBV & SSV Vaporizers w/Water Tool v1.75 instructions

DDave Econo & Micro-Mod for DBV & SSV Vaporizers w/Water Tool v1.75

Each Kit includes:
An 18mm Clear Borosilicate glass wand + 3 tip basket SS screens
One Whip Tube - 2.5 feet long
One WPA Water Tool Whip Adapter of choice (18mm or 14mm)
An 14mm Clear Borosilicate glass wand + 6 tip basket SS screens
An 18mm to 14mm SHORTY reducer adapter (No loss in distance from heater!)


Please note, these wands do not accomodate the internal screens you're used to using with the DBV & SSV stock wands. The efficiency you'll see by moving product closer to the heater will amaze you. The difficulty of cleaning wand screens removed. See the below instructions for suggested operating methods.


Kit Overview:
There one goal to this kit. Control! And putting you back in it! This kit with custom screens allows you more control over the quantity of herbs you wish for your session. Preheat your vape for 10-15 minutes at your desired temperature before beginning your sessions!


Heater Recallibration: Not your vaporizer's! Your's! With any mod, parameters of your sessions will change and in this mod, that's no different. Dial back temps a bit so you start out at what you'd consider lower temp. Remember, you're bringing your product closer to the heater. You've also just improved your overall airpath and airflow from heater - through glass- to product processing point... You need to once again find your setup's sweet spot. Once you do, there's no turning back! You simply won't want to!


To use:
Preheat your Vaporizer at desired temperature. Grind the herbs of your choice to desired consistency.
In a cold or cool wand, insert your screen or have it pre-inserted.
Either place your herbs into the upturned basket screen or vacuum them up with the whip attached.
Gently tamp down to your desired level of firmness. You want them to stay in the basket, but not be too densly packed.
(Remember, the more tamp, the more resistance to your draw.)


To Use the new Mini Mod:
Same principle as the usage instructions above with the addition of the 18mm to 14mm SHORTY adapter so the 14mm wand fits inside your vaporizer.


Results:
More even extractions! One-Hit extractions! Conservation of the herbs! Greater control over your sessions!


Cleaning: Cleaning is now easier than ever! Soak wands and screens in ISO of your choice. No more pushing or pulling sticky screens out of the inside of the wand. The basket screens included in the kit are easy to grasp from the rim. Gently wiggle out and clean. For best results you do want to remove screens from wand before cleaning! (If they seem stuck, simply slightly heat the wand to more-easily remove)... Remember, these screens are robust! Clean them as often as you wish!


Heat Disclaimer: During use of the DDave DBV & SSV Econo Mod, as with any heated vaporizer components or addons, care must be taken to avoid being burned! We all have different tollerances, to heat (and other things), so using personal best judgement is advised and properly warning guests of this would probably be appreciated as well. Glass gets hot!